5 Reasons your Home Receives Low Water Pressure
Everyone faces blocked drains and pipes severe enough to necessitate the services of a plumber. But what if the problem isn’t with the water draining but with the volume of water that comes out? The typical water pressure in residence is between 40 and 45 pounds per square inch. The average family uses 300 gallons of water each day between bathing, running the dishwasher, and flushing the toilet. We don’t often consider where our water comes from or how it gets to our faucets. When the water pressure dips, most of us don’t know where to look, nor should we call the plumbing service.
Let us check some of the reasons why low water pressure happens at Home:
- There is an issue with the water supplier–
Ask around before you start twisting valves and pounding on pipes. If your neighbors are experiencing the same problems, it’s unlikely that your low water pressure is due to a problem in your home.
Find out if your water supplier is aware of and working on a problem with your water supply by contacting them. You’ll have to wait a while if it’s something that they’re currently working on. If they reject or refuse to handle the problem, you may need to mobilize. You didn’t think correctly washing shampoo out of your hair would necessitate a petition, but it could.
- Main House Shutoff Valve Isn’t Open All the Way.
If you’re the only one on the block with low water pressure, it’s time to start looking for the problem in your own home.
Homeowners must understand where their main house cutoff valve is located and how to turn it off. Now we’ll talk about what occurs if it isn’t completely open. You haven’t tampered with this valve unless you’ve had an emergency involving a leak or a busted pipe. It might be outdoors, but it’s much most likely to be inside, where the main municipal supply pipe enters your property.
- Pipes are clogged
Clogs don’t simply form behind drains, believe it or not. They may grow deep within your plumbing, and even a minor clog might cause your water pressure to drop.
Because this type of blockage might be located anywhere beneath your home, you’ll need to hire a plumber. Professional plumbing service ensures that every aspect of pipes is checked if there is a clogged and how it can be free.
There are chances of pipes getting contaminated. Furthermore, you may not be aware of what you’re releasing or polluting your pipes with. It’s one thing to pour hazardous chemicals down your drain to dissolve blockages, but it’s not a good idea.
- Pipes are corroded
Pipes, especially the galvanized steel pipes, have a shelf life. Galvanized steel pipes can corrode in as little as 20 years. Copper pipes are typically excellent for 50 years or more, whereas brass pipes should last 40 and 70 years. If you live in an older home, the risk of corrosion is relatively higher. Newer pipes aren’t frequently composed of galvanized steel, so their plumbing should last for years, but old homes will need proper piping work.
- Pipes are Leaking
In case you witness flooding in the foundation, then pipes are indeed leaking. However, it only takes a small leak to disrupt your water pressure. The leak misdirects your water supply, so you aren’t getting the full flow even if everything else is operating correctly. Leaky pipes may cause foundation damage as well as pollute your drinking water. In such cases, the best is to professional plumbing service. The professionals will work in every aspect of the pipe leakage.
Conclusion
Low water pressure is a common problem, so it is best to hand over the job to a professional to overcome this issue. The company also works on the pump installation service, which is a part of the job.